Elastomers test unit

Non-destructive identification of elastomers material (only for material, not for the hardness!)
on present components in maintenance, repair shop and storage

Design Features Scope of delivery Advantage

• Easy to use
• Identification of following material
  E = Ethylene-Propylene-Diene Rubber (EPDM)
  P = Acrylonitrile-Butadiene Rubber (NBR)
  V = Fluorocarbon Rubber (FKM, FPM or Viton®)
• As well for old, polluted or
   hardened O-rings usable

• Case
• Tester
• 3 O-rings
  (EPDM, NBR, FKM)
 • Avoidance of consequential damage
• Identification of required material
   before use


Elastomers test unit in the case   Elastomers test unit (Scope of delivery)
Elastomer Tester im Etui   Elastomer Tester (Lieferumfang)


1nd step
Elastomers test unit - Step 1


Lay down the sample on a hard support and place the tester upright on the sample. Take the reflection solid (stud in the tube) on the pin to the upper limit.		  
2nd step
Elastomers test unit - Step 2
 

Release the pin. Observe and notice the height of the spring back (V, P or E). The heights can slightly vary by different manufacturers, lots and compounds.


►add in catalog    ►to the contact form